Pneumatisch geactiveerde 2-weg regelklep met rechte klep ELEMENT
Type 2301 / Artikelnr. 215245
Productbeschrijving
Volgens de Bürkert-filosofie voldoet de vormgeving van de regelklep met rechte klep type 2301 aan alle voor de praktijk relevante eisen, ook in moeilijke gebruiksomstandigheden. Door de beproefde, zichzelf bijstellende spindelpakking met verwisselbare dakmanchetten worden een zeer lange levensduur en dichtheid bereikt. Ieder kleplichaam met rechte klep kan worden uitgerust met maximaal 5 verschillende afmetingen van klepzittingen. Deze combinaties van paraboolkegel en klepzitting resulteren in een betrouwbare en herhaalbare karakteristiek om het debiet te veranderen. De regelkegels zijn ofwel in rvs ofwel met een duurzame PTFE-afdichting of PEEK-afdichting voor een dichte afsluiting conform lekkageklasse III, IV of VI leverbaar. Door het design van de aandrijving kunnen automatiseringseenheden eenvoudig in alle uitbreidingsfasen worden geïntegreerd, van de digitale elektropneumatische standenregelaar tot en met de procesregelaar. Het sterk geïntegreerde systeem van klep en automatiseringseenheid wordt gekenmerkt door compactheid en gladde vlakken in het design, geïntegreerde kanalen voor besturingslucht, beschermingsklasse IP65/67 en een grote chemische bestendigheid.
- Goederencode
- 84818073
- Land
- DE
Technische omschrijving
Naam |
Waarde |
Eenheid |
---|---|---|
Type | 2301 | |
Product sub-group | Process control valves | |
Actuator version | ELEMENT | |
Main valve operating principle | Globe valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 16 | bar |
Control pressure min | 5.5 | bar |
Control pressure max | 7 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 185 | °C |
Kv value (water) | 2.7 | m3/h |
Pressure Class (PN) | PN 25 | |
Pressure class (LB) | 150 LB | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Metals | |
Seat seal material | stainless steel | |
Orifice | 10 | mm |
Body nominal size | 15 | mm |
Body nominal size (IN) | 1/2 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 3/8 | |
Flow | Below seat | |
Actuator size | 70 | mm |
Actuator material | PPS (Polyphenylene sulphide) | |
Control air connection material | Plastic | |
Control air connection type | Interface ELEMENT | |
Control air connection diameter (mm) | 6 | mm |
Control air connection 1 pre-mounted | not equipped | |
Control air connection 2 pre-mounted | not equipped | |
Control air connection position | in line direction | |
Control cone | Yes | |
Swivel plate | no | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Position indicator | without | |
Seal nipple body material | Graphite | |
Packed seal enclosed | No | |
Vacuum version | No | |
Additional manual actuation included | No | |
Gewicht | 1,744000 | kg |
Goedkeuringstype | ||
Certific.type |
Downloads
Informatiebladen
Gebruiksaanwijzingen
EU-verklaring
Flyers en catalogi
Beschrijving |
Best.form. |
Taal / Land |
|
---|---|---|---|
![]() |
Solutions for successful Cleaning in Place (CIP) | 484,9 kB | EN / EU |