INSERTION fitting voor doorstroom- of analysemetingen
Type S020 / Artikelnr. 443317
Productbeschrijving
De fitting kan voor het aansluiten van willekeurige INSERTION-apparaten voor een meting in de buis worden benut, bv. voor metingen van doorstroom, pH, redoxpotentiaal en geleidingsvermogen. De fitting is beschikbaar voor schoepenrad- en magnetisch-inductieve debietmeters en analysemeetapparatuur met G2“- of Clamp-aansluiting.
- Goederencode
- 90261021
- Land
- FR
Technische omschrijving
Naam |
Waarde |
Eenheid |
---|---|---|
Type | S020 | |
Product sub-group | Fitting | |
Temperature medium min | -15 | °C |
Temperature medium max | 160 | °C |
Nominal pressure (DIN EN 1333) | PN 16 | |
Fitting electronic interface | Insertion 2 (inch) | |
Min measured value of volume flow rate | 422 | |
Max measured value of volume flow rate | 14.061 | |
Measured value unit | l/h | |
Diameter measuring tube (DN) | 20 | mm |
Fluidic port connection number | 2 | |
Port connection 1 type | Threaded connection system | |
Port connection 1 thread type | Stainless steel compression fitting following SMS1145 | |
Port connection 1 thread marking | Rd 40 x 1/6" | |
Port connection 1 size DN | DN 25 | |
Port connection 1 inner diameter (mm) | 22,6 | mm |
Port connection 1 wall thickness (mm) | 1,2 | mm |
Port connection 1 outer diameter (mm) | 25 | mm |
Port connection 1 pipe standards 1 | SMS 3008 | |
Port connection 1 threaded connection system | Milk tube SMS 1145 | |
Port connection 2 type | Threaded connection system | |
Port connection 2 thread type | Stainless steel compression fitting following SMS1145 | |
Port connection 2 thread marking | Rd 40 x 1/6" | |
Port connection 2 size DN | DN 25 | |
Port connection 2 inner diameter (mm) | 22,6 | mm |
Port connection 2 wall thickness (mm) | 1,2 | mm |
Port connection 2 outer diameter (mm) | 25 | mm |
Port connection 2 pipe standards 1 | SMS 3008 | |
Port connection 2 threaded connection system | Milk tube SMS 1145 | |
Port connection material category | Metals | |
Port connection material | Stainless steel | |
Measuring pipe material | Stainless steel | |
Armature material | Stainless Steel | |
Medium-contacting parts seal material | EPDM (Ethylene-propylene-diene rubber) | |
Roughness of pipe inside | 1,6 | µm |
Roughness of pipe outside | 3,2 | µm |
Installation length | 130 | mm |
Gewicht | 2,000000 | kg |